service and repair
the details
service is readily available for fetco drip brewers, most grinders, and select espresso machines. following are common needs associated with each:
on drip/batch brewers
primary contributors to damage and quality issues include:
- spray head clogging
- scale buildup (due to poor filtration)
- lack of calibration
tune-ups don't take long but are invaluable for the long haul.
on grinders
the grinder is the crux of coffee quality, particularly espresso; many issues stem from:
- dull burrs
- oil & grind buildup
- anti-static problems
- dial-in issues
grinder tune-ups are similarly quick, but valuable.
on espresso machines
requiring the most care, alongside the highest quality standards, espresso has a myriad of needs and is where the bulk of a tune-up comes to play. common needs include:
- gasket replacements
- screen replacements
- steam wand & tip service
- dial-in adjustments
- filtration swaps
tune-ups extend machine life and time between large repairs dramatically.
in-person diagnostics are available for any grinder, drip brewer, or non-automatic espresso machine that requires more than a phone call.
if we can’t diagnose the problem, we won’t charge. If we service a repair, we only charge for the time and parts and drop the diagnostic fee.
tune-ups are similar to an annual doctor's visit; they're preventative, yet necessary for the long haul.
for your equipment, we focus on three primary categories:
- routine parts replacement (i.e. gaskets, screens)
- internal diagnostics
- water quality assurance
the upkeep of these three pillars will extend a machine's life by years, maintain consistency and quality for your coffee, and greatly reduce emergency repair expenses.
we suggest beginning with a semi-annual or annual standard tune-up rhythm depending upon your volume. this is up to you; we may suggest a rhythm for your equipment, but we’ll wait for you to request the service!
tune-ups are, as mentioned above, available for fetco coffee brewers, most grinders, and many semi-automatic and manual espresso machines. timeline & extent of product coverage will be discussed for each individual's equipment. see "service details" for more more specific information.
drop-off
equipment can be dropped off (24-48 hour advanced notice required) for repair in our service lab. think of us like an auto shop. you drop off your equipment, and we update you along the way until it’s ready to go.
on-site
we currently offer limited on-site repairs; we will discuss machine symptoms with you preemptively and help how we can. some repairs we can perform on-site, and some we cannot, but we will get you going in the right direction regardless.
Diagnostic only: $50
Tune-ups and Repairs (hourly): $75
Parts: 20% markup from our cost
Travel: $0.70/mi beyond 15 miles
Emergency after-hours support (hourly): $125
included is more detailed information regarding tune-up inspections.
please note: we'll bundle as much as possible. for example, if we service your drip brewer, grinder, and espresso machine, we'll gladly bundle the trip into one to minimize cost.
Drip Brewer Tune-up
Baseline and minimal parts ~ 30min-1hr
- Spray head cleaning and inspection (each visit)
- Brew volume verification and calibration (each visit)
- Water filter inspection and replacement (each visit, as needed & case by case)
- Hot water tower checks (semi-annual, as needed)
- Scale identification and pot descaling (semi-annual check, as needed)
- Diagnostics & suggested repairs (as needed)
- General preventative maintenance inspection and report (each visit)
Grinder Tune-up
Baseline and minimal parts ~ 30 min-1 hr
- Burr inspection and wear evaluation (each visit)
- Deep chamber and chute cleaning (each visit)
- Hopper and declumper service & cleaning (each visit)
- Grind consistency check & calibration (semi-annual, as needed)
- Retention troubleshooting (as needed)
- Espresso dial-in support (as needed)
- Burr replacement (as needed)
- Diagnostics & suggested repairs (as needed)
- General preventative maintenance inspection and report (each visit)
Espresso Machine Tune-up
Baseline and minimal parts ~ 1.5hr
- Backflush and chemical cleaning (each visit)
- Shower screen check and replacement (each visit, as needed)
- Steam wand and tip check and service (each visit, as needed)
- Pressure verification (each visit, where applicable)
- Pump and solenoid checks (each visit)
- Grouphead gasket replacement (quarterly)
- Drain line cleaning (semi-annual, or as needed)
- Emergency service support / Diagnostics & suggested repairs (as needed)
- Water filtration inspection and replacement (as needed, case by case)
- General preventative maintenance inspection and report (each visit)